Automotive testing accelerometer / 汽車加速度檢測

利安科技股份有限公司

新北市汐止區康寧街169巷23號7樓之一

回技術支援網

公司電話:+886-2-26958906

 

首頁
MS9000
HS8000
TS1000T
TS9000
TS8000
VS1000
VS9000
GS1000
GM1000
GM1000Px
Guided ammunition / 制導彈藥
Accelerometer for missile guiding systems / 加速度導彈導向系統
Dynamic GPS tracking systems / 動態GPS跟踪系統
Dynamic platform stabilization / 動態平台穩定
Ground motion detection / 地面運動檢測
AHRS MEMS accelerometers / (AHRS)加姿態航向參考系統,MEMS加速度計
Inertial Navigation Systems / 慣性導航系統
Helicopter Attitude, Heading and Reference System (AHRS) / 直升機姿態,航向參考系統(AHRS)
Active Suspension Systems / 主動懸掛系統
Active Tilting Systems / 主動傾斜系統
Bogie Monitoring Systems / 轉向架監測系統
Train Positioning Systems / 列車定位系統
Wind Turbines / 風力發電機
Drilling sensor / 鑽孔傳感器
Static Antenna Stabilization / 靜態天線穩定
Automotive testing accelerometer / 汽車加速度檢測
Machine Health Monitoring (MHM) / 機器健康監測
Structural Health Monitoring (SHM) / 結構健康監測
Inclination monitoring / 傾斜角監控
Seismic Detection / 地震探測

Automotive testing accelerometer / 汽車加速度檢測

Today’s Automotive Industry is defined by high competitive pressure, which has resulted in development schedules being shorter than they were a decade ago. This basically means that manufacturers have to react more swiftly to market conditions, legislative requirements and customer demands by replicating all the major inputs a vehicle might experience during its operating environment in a condensed testing program. In order to meet these tight development schedules, physical durability testing has been combined with virtual durability testing, a method entirely dependent on the reliability, robustness and flexibility of sensing technologies. Our MEMS accelerometers perfectly accommodate vehicle and component durability testing requirements.

 

The importance of accelerometers in Automotive Testing

Component durability testing lies at the heart of a successful testing program, and accelerometers are a key part of component testing, allowing more accurate readings performed over shorter periods of time. A poorly executed testing program might directly impact the sales, warranty costs and customer loyalty of a manufacturer, which is why robust and reliable accelerometers are so sought after.

 

The MEMS revolution

MEMS capacitive accelerometers are a cost-effective solution for automotive testing programs, as they provide exceptional levels of performance in terms of long-term stability, temperature stability and accuracy, all while operating successfully under harsh conditions.

 

Colibrys – testing the limits of innovation

Colibrys MEMS accelerometers in the VS1000 family have a full scale range from ± 2g to ± 200g, which makes them ideal for a wide variety of automotive testing requirements. Their high reliability and high resistance to shock, vibration and temperature allow them to provide accurate readings in the following applications:

  • Durability testing
  • The testing of suspensions and damping systems
  • Ride evaluation
  • Data collection for the running of simulations
  • The monitoring of vehicle dynamics and NVH (noise, vibration & harshness)

Not only do our products grant a high level of accuracy to automotive testing, but they also enable tests to have a high degree of repeatability, which shortens development time and proves as a cost-effective solution in the long run.


公司電話:+886-2-26958906

上次更新日期: 2022年08月03日。