Guided ammunition / 制導彈藥
Accelerometer for missile guiding systems / 加速度導彈導向系統
Dynamic GPS tracking systems / 動態GPS跟踪系統
Dynamic platform stabilization / 動態平台穩定
Ground motion detection / 地面運動檢測
AHRS MEMS accelerometers / (AHRS)加姿態航向參考系統,MEMS加速度計
Inertial Navigation Systems / 慣性導航系統
Helicopter Attitude, Heading and Reference System (AHRS) / 直升機姿態,航向參考系統(AHRS)
Active Suspension Systems / 主動懸掛系統
Active Tilting Systems / 主動傾斜系統
Bogie Monitoring Systems / 轉向架監測系統
Train Positioning Systems / 列車定位系統
Wind Turbines / 風力發電機
Drilling sensor / 鑽孔傳感器
Static Antenna Stabilization / 靜態天線穩定
Automotive testing accelerometer / 汽車加速度檢測
Machine Health Monitoring (MHM) / 機器健康監測
Structural Health Monitoring (SHM) / 結構健康監測
Inclination monitoring / 傾斜角監控
Seismic Detection / 地震探測


TS1000T high Temperature Inclinometer  (Datasheet)

The new TS1000T is the best in class MEMS Accelerometer when it comes to measure inclination under high-temperature. This inclinometer has been designed for application such as drilling and is available in 3 ranges : ± 2 , 5 and 10 g.

This sensor offers the highest performance stability with shock resistance, as well as the lowest non-linearity and noise in the MEMS marketplace. It can operate from -40°C to 150°C for more than 1000 hours, even by intermittent temperature exposition up to 175°C.

A new differential analog output with a low noise ASICs, in addition to an improved 3D Bulk MEMS and die attach process, along with the very small LCC20 hermetic package feature a long-term bias stability better than 1000ppmFS.

The TS1000T embeds a temperature sensor to easily compensate any thermal error and offers an excellent repeatability with a residual modelling error less than  ± 0.6 mg for a ±2 g version.

Each product is fully tested in production over temperature range. The internal signal analog conditioning offers a Built in Self-Test and overload functions for your confidence at all time.

We  recommend to use the sensor with its dedicated Ceramic Evaluation Board (CEB_1000) for test and evaluation. Colibrys will propose soon a Ceramic Interface Board (CIB_1000)  to integrate easily our device in system. Stay connected  for future information.


Key features

  • High temperature range from -40° to 175°C
  • Excellent Bias residual modelling error < ±0.6 mg for ±2g range
  • Endurance to high repetitive shock more 1500g (500 times) ,
  • Low Noise < 7 μg/Sqrt Hz typ for ±2 g range

Contact Us!點我立即連絡! 公司電話:+886-2-26957033


上次更新日期: 2021年12月03日。